GEAppliances.com

SAFETY PRECAUTIONS

Safety

Locate the range out of kitchentraffic path and out of drafty locations to prevent poor air circulation.

Be sure all packaging materialsare removed from the rangebeforeoperating it to prevent fireor smoke damageshould the packaging material ignite.

Be sure your range is correctlyadjusted by a qualified servicetechnician or installer for the type of gas (natural or LP) that is to be used. Your range can be convertedfor use with either type of gas. See the Installation of the range section.

WARNING: These adjustments must be made by a qualified service technician in accordance with the manufacturer’s instructions and all codes and requirements of the authority having jurisdiction. Failureto followthese instructions could result in serious injuryor property damage. The qualified agency performing this work assumes responsibility for the conversion.

After prolonged use of a range, high floor temperatures may resultand many floor coverings will not withstandthis kind of use. Never install the range over vinyl tile or linoleum that cannot withstand such type of use. Neverinstall it directlyover interior kitchen carpeting.

Do not leavechildren alone or unattended where a range is hot or in operation. They could be seriously burned.

Do not allow anyone to climb,stand or hang on the ovendoor, draweror cooktop. They could damage the rangeand eventip it over, causing severe personal injury.

CAUTION: Items of interest to children should not be stored in cabinets above a range or on the backsplashof a range—children climbing on the range to reachitems could be seriously injured.

For your safety, neveruse your appliance for warming or heating the room.

Large scratches or impacts to glassdoors can lead to broken or shatteredglass.

Never wear loose-fitting or hanging garments while using the appliance. Be careful when reaching for items storedin cabinets over the range. Flammablematerial could be ignited if brought in contact with flame or hot oven surfaces and may cause severe burns.

Do not store flammable materials in an oven, a range drawer or near a cooktop.

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Do not let cooking grease or other flammable materials accumulate in or near the range.

Do not use water on grease fires. Never pick up a flaming pan. Turn the controls off. Smother a flaming pan on a surface burner by covering the pan completely with a well-fitting lid, cookie sheet or flat tray.

Use a multi-purpose dry chemical or foam-type fire extinguisher.

Flaming grease outside a pan can be put out by covering it with baking soda or,

if available, by using a multi-purpose dry chemical or foam-type fire extinguisher.

Flame in the upper oven or lower oven drawer can be smothered completely by closing the oven door or drawer and turning the control to off,or by using a multi-purpose dry chemical or foam-type fire extinguisher.

Let the burner grates and other surfaces cool before touching them or leaving them where children can reach them.

Never block the vents (air openings) of the range. They provide the air inlet and outlet that are necessary for the range to operate properly with correct combustion. Air openings are located at the rear of the cooktop, at the top and bottom of the oven door,and at the bottom of the range under the lower oven drawer or kick panel.

Do not lift the cooktop. Lifting the cooktop can lead to damage and improper operation of the range.

Instructions Operating Instructions

Instructions

Installation

 

 

Troubleshooting Tips Consumer Support

5

Page 5
Image 5
GE 04-09 JR, C2S980, 49-85167-1, 183D5580P249 manual Safety

183D5580P249, 49-85167-1, 04-09 JR, C2S980 specifications

The GE C2S980,04-09 JR,49-85167-1,183D5580P249 is a sophisticated control system utilized in various industrial applications, specifically designed for enhancing efficiency and reliability. This model exemplifies advanced technologies and systems integration, catering to the needs of modern industries.

One of the main features of the GE C2S980 is its flexibility, allowing it to be integrated seamlessly into different types of systems. This adaptability makes it suitable for manufacturing plants, power generation facilities, and other industrial environments. The device is engineered for mobility and can be quickly deployed or modified according to the operational requirements of the facility.

A notable technology embedded within the GE C2S980 is its robust data acquisition capabilities. It can gather and process large volumes of data in real-time, which is crucial for effective monitoring and control. This feature enables operators to make informed decisions based on accurate and up-to-date information regarding equipment performance and system health.

Additionally, the GE C2S980 is equipped with advanced diagnostic tools. These tools assist in identifying faults and inefficiencies within the system, thereby reducing maintenance costs and minimizing downtime. Its built-in analytics engine helps in predictive maintenance, enabling industries to foresee potential issues before they escalate into serious problems.

The C2S980 also prioritizes user experience, featuring an intuitive interface that simplifies the navigation of complex controls. This user-friendly design reduces the learning curve for operators, enhancing overall productivity.

Another critical characteristic is its compliance with industry standards, ensuring safety and reliability in various applications. The system is designed to operate in challenging conditions and is built to withstand environmental factors, thus guaranteeing longevity and consistent performance.

In terms of connectivity, the GE C2S980 supports various protocols, facilitating interoperability with other devices and systems. This connectivity is essential for industries that rely on integrating multiple technologies into their operations.

Overall, the GE C2S980,04-09 JR,49-85167-1,183D5580P249 stands out due to its combination of advanced technology, user-centric design, and adaptability to diverse industrial environments, making it an invaluable asset for enhancing operational efficiencies.