Safety Instructions
Installationof the range.
Seal the Openings
Seal any openings in the wallbehind the range and in the floor under the rangewhen hookups are completed.
Instructions
Assemble Surface Burners
Burner Heads (on some models)
Place burner heads over the electrodes on the cooktop, in the correctlocations according to their size. There is one small, one
Caps
Place the matching size caps onto the burner bases or heads.
Operating
medium, one extra large and one dual flame extra largeburner head.
Medium head |
| Small head |
|
Medium cap
Extra large cap Front of range
Small cap
Dual flame extra
large cap
Extra large head |
|
|
|
|
|
|
|
|
|
|
| Dual flame |
|
| Front of range |
|
| ||||||||
|
|
|
|
|
|
|
|
| extralargehead | |||
|
|
|
|
|
|
|
|
|
|
|
|
Make surethat the heads and caps are replaced in the correct locations.
Installation | Instructions |
Troubleshooting Tips
|
| Front right burner |
Frontleft,backrightandbackleftburners | Burner cap | |
|
| |
Burner cap |
|
|
Burner |
| Burner |
head |
| head |
|
| |
Stability | Electrode | Burner |
chamber |
| |
|
| base |
Burner base |
| Electrode |
Make sure the slot in the | Makesuretheholein theburnerhead | |
burner head is positioned | assemblyis positionedovertheelectrode | |
over the electrode. |
| andthattheburnerheadis fullyinsertedinside |
| theburnerbase.A smallgapbetweenthebase | |
|
|
andheadis normal.
Oval(Center) Burner Head/Cap Assembly
Place the oval (center) head/cap assembly over the electrode on the cooktop.
Oval head and | Make sure the slot in the burner | |
head is positioned over the | ||
cap assembly | ||
electrode. | ||
|
Grates
Place the left, right and center grates on the cooktop. These grates are position specific. The undersides of the left and right grates are marked “OUTSIDE.” Place the middle grate with its bowed fronttoward the front of the range.
Outside grate | Center grate Outside grate |
CAUTION:Do not operate the burner without all burner parts in place.
Consumer Support
Slot
Front of range | Electrode |
50