GE 49-85167-1, C2S980, 04-09 JR manual Using the probe, Operating Instructions Safety, Installation

Instructions

Using the probe.

For many foods, especially roasts and poultry, internal food temperature is the best test for doneness.

The temperature probe takes the guesswork out of roasting by cooking foods to the exact doneness you want.

Operating Instructions Safety

The temperature probe has a skewer-like probe at one end and a plug at the other end that goes into the outlet in the oven.

Use ofprobes other than theoneprovidedwith thisproductmayresult indamage tothe probe.

Use the handles of the probe and plug when inserting and removing them from the food and outlet.

■To avoid damaging your probe, do not use tongs to pull on the cable when removing it.

■To avoid breakingthe probe, makesure food is completelydefrosted before inserting.

■To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled.

Cable

Plug

Probe

Handles

■Never leave your probe inside the oven during a self-cleaning cycle.

■Do not store the probe in the oven.

Installation Instructions

After preparing the meat and placing it on a trivetor on a broiler pan grid, follow these directions for proper probe placement.

Insert the probe completely into the meat. It should not touch the bone, fat or gristle.

For roasts with no bone, insert the probe into the meatiest part of the roast. For bone-in ham or lamb, insert the probe into the center of the lowest large muscle.

Insert the probe into the center of dishes such as meat loaf or casseroles.

Insert the probe into the meatiest part of the inner thigh from below and parallel to the leg of a whole turkey.

How to Set the Upper Oven For Roasting When Using the Probe

Consumer Support Troubleshooting Tips

Insert the probe into the food.

Plug the probe into the outlet in the oven. Make sure it’s pushed all the way in. Close the ovendoor.

Touch the PROBE pad.

Touch the number pads to set the desired internal food or meat temperature.

Touch the BAKE pad.

Touch the number pads to set the desired oven temperature.

Touch the START pad.

The displaywill flash if the probe is inserted into the outlet and you havenot set a probe temperature and touched the STARTpad.

After the internal temperature of the food reaches 100°F, the changing internal temperature will be shown in the display.

When the internal temperatureof the food reaches the number you have set, the probe and the oven turn off and the oven controlsignals. To stop the signal, touch the CLEAR/OFF pad. Use hot pads to remove the probe fromthe food. Do not use tongs to pull on it—they might damage it.

To change the oven temperature during the Roastcycle, touch the BAKE pad and then the number pads to set the new temperature.

■If the probe is removed from the food before the final temperatureis reached, a tone will sound and the display will flash until the probe is removed from the oven.

■You can use the timer even though you cannot use timed oven operations while using the probe.

18