GE 49-85167-1 Oven Racks and Drawer Racks, Oven Light Replacement, Care and cleaningof the range

Instructions

Care and cleaningof the range.

Safety

Oven Racks and Drawer Racks

Cleanthe racks with an abrasive cleanser.

The oven racks may be cleaned in the self-cleaning oven. However,the racks will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle.

To make the racks slide moreeasily, apply a small amountof vegetable oil or cooking oil to a paper towel and wipe the edges of the oven racks with the paper towel.

Operating Instructions

Installation Instructions

Consumer Support Troubleshooting Tips

Wire cover holder.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnectthe electrical power to the range at the main fuse or circuit breaker panel. Be sureto let the light cover and bulb cool completely.

The oven light bulb is covered with a removable glass cover that is held in place with a bail-shaped wire. Remove the oven door, if desired, to reachcovereasily.

To remove:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wirecover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Do not touch hot bulb with a wet cloth. Replace bulb with a 40-watt household appliance bulb.

To replace cover:

Place it into the groove of the light receptacle. Pull the wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire is in the depression in the center of the cover.

Connect electrical power to the range.

38