Resuming Playback from the Point Where You Stopped the Disc (Resume

Play)

When you stop the disc, the player remembers the point where you pressed x and “RESUME” appears on the front panel display. As long as you do not remove the disc, Resume Play works even if the player enters standby mode by pressing ?/1.

Notes

•Depending on where you stopped the disc, the player may not resume playback from exactly the same point.

•The point where you stopped playing is cleared when:

–you disconnect the mains lead.

–you change the play mode.

–you change the settings on the Setup Display.

–you switch to MS mode.

–the player enters standby mode (DATA-CD, “Memory Stick” and “MG Memory Stick” only)

H x

1 While playing a disc, press x to stop playback.

“RESUME” appears on the front panel display and you can restart the disc from the point where you stopped the disc.

If “RESUME” does not appear, Resume Play is not available.

2 Press H.

The player starts playback from the point where you stopped the disc in Step 1.

zTo play from the beginning of the disc, press x twice, then press H.

40