Notes
•If the disc is inserted with playback side up, a “No Disc” or “Cannot play this disc.” message appears.
•Discs created on DVD recorders must be correctly finalized to play on this player. For more information about finalizing, refer to the operating instructions supplied with the DVD recorder.
•The disc may be still spinning when the disc lid is opened. Wait until the spinning stops before removing the disc.
•During operation, “ 
” may appear on the screen. This symbol indicates that a function explained in this operating instruction is not available on the current DVD VIDEO.
•Some
To stop playback
Press x.
Pressing H again will start playback from the point you stopped (Resume Play). See page 22 for details.
To play from the beginning, press x twice, then press H.
To turn off the power
Press the remote’s \/1 button or slide the player’s \/1/HOLD switch to “\/1.”
To avoid accidental button operation on the player
Set the player’s \/1/HOLD switch to “HOLD.” All the buttons on the player are locked, while the button on the remote remains operable.
To play DTS sound tracks on a DVD VIDEO
•The player’s speaker does not output DTS sound. When you play DTS sound tracks on a DVD VIDEO, connect the player to an AV amplifier (receiver) (page 49) and set up “DTS” in “Audio Setup” (page 44).
•If you connect the player to audio equipment such as an AV amplifier (receiver) without a DTS decoder, do not set “DTS” to “On” in “Audio Setup” (page 44). A loud noise may come out from the speakers, which may affect your ears or cause speaker damage.
Notes
•A screen saver image appears when you leave the player in pause or stop without operation for more than 15 minutes. The image disappears when you press H. See page 42 for details.
•The player turns off, 15 minutes after starting the screen saver function (Auto Power Off).
Discs Playing
,continued 21