Connecting to an AV amplifier (receiver)
Example 1
| Stereo amplifier |
To AUDIO | To AUDIO input |
Audio/video cord (supplied)
To send the playback signal to an AV amplifier (receiver)
1Set the LINE SELECT switch on the player’s right side to “OUT.”
* The yellow plug is used for video signals (page 48).
Example 2
Amplifier with Dolby Digital or DTS decoder
To OPTICAL OUT | To AUDIO input |
Hookups
Optical digital cord (not supplied)
To send the playback signal to an AV amplifier (receiver)
1Set the LINE SELECT switch on the player’s right side to “OUT.”
2Set “Digital Output” to “On” in “Audio Setup” (page 43).
,continued 49