14
Using in a Car (for Rear Seat Passenger)
Use the headrest mounting bracket and car battery adaptor (both supplied) for rear seat
passengers to enjoy the player.
Notes
• Do not perform installation while the car is being drive n.
• The adaptor is for a 12V car battery. Do not use it with a 24V car battery.
• The adaptor is only for use with negatively grounded cars. Do not use it with cars grounded positivel y.
• Depending on the seat type, it may not be possible to mount the player .

Mounting the player at the back of the front seat

You should not use the battery pack in the car. Turn off the player an d remove the battery pack
in advance (page 12).
1Adjust the height of the headrest to allow approx. 3 cm of sp ace (1).
Attach the bracket by buckling up firmly until you hear click (2), then securely tighten
the belt (3).
2Rotate and fold down the LCD panel (page10).
3Securely hold the player with both hands.
Engage the hooks of the bracket in the holes on the player’s bottom, and slide the
player in the direction of the arrow until it clicks into place.
Approx. 3 cm
If the space is too wide, the belt may loosen,
which could cause an accident or injury.