Step 3: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A through C, according to the input jack on your TV monitor, projector, or AV amplifier (receiver).
In order to view progressive signal (525p or 625p) pictures with a compatible TV, projector, or monitor, you must use pattern C.
A |
|
|
|
| |
INPUT | (yellow) |
|
| ||
VIDEO |
| Audio/video |
|
| |
| cord (not supplied) S VIDEO cord |
|
| ||
|
| INPUT | B | ||
L |
| (not supplied) | S VIDEO | ||
|
|
|
| ||
AUDIO |
|
|
|
| |
R |
|
|
|
| |
|
|
| TV, projector, or AV | ||
TV, projector, or AV |
| amplifier (receiver) | |||
|
|
| |||
amplifier (receiver) | (yellow) |
|
| ||
|
|
|
| ||
|
| to S VIDEO OUT |
| ||
| to LINE OUT (VIDEO) |
|
| ||
|
| to COMPONENT | CD/DVD player | ||
|
| VIDEO OUT* |
|
| |
| (green) | (blue) (red) |
| C | |
|
|
| COMPONENT | ||
|
|
| VIDEO IN | ||
|
|
| Y | (green) | |
|
|
|
| ||
Component video | PB/CB |
| |||
cord (not supplied) | (blue) | ||||
| |||||
|
|
| PR/CR | (red) | |
|
|
|
| ||
|
|
| TV, projector, or AV | ||
|
|
| amplifier (receiver) |
l: Signal flow
*Note that using the COMPONENT VIDEO OUT jacks will cause the picture to go blank. In this case, press the PROGRESSIVE button for more than three seconds. Repeat this step until you see the picture.
AIf you are connecting to a video input jackConnect the yellow plug of an audio/video cord (not supplied) to the yellow (video) jack. You will enjoy standard quality images.
With this connection, select “LINE OUT/S VIDEO OUT” (default) by pressing the PROGRESSIVE button on the front panel.
Hookups
,continued 15