| SCREEN SETUP |
| |
|
| TV TYPE: | 16:9 |
|
| SCREEN SAVER: | 16:9 |
|
| BACKGROUND: | 4:3 LETTER BOX |
|
| 4:3 OUTPUT: | 4:3 PAN SCAN |
|
|
|
|
|
|
|
|
7 Press X/x to select the setting that matches your TV type.
◆If you have a
• 16:9 (page 61)
◆If you have a 4:3 standard TV
•4:3 LETTER BOX or 4:3 PAN SCAN (page 61)
8 Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.
Is this player connected to an amplifier (receiver) ? Select the type of jack you are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9 Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press
ENTER.
If you did not connect an AV amplifier (receiver), select “NO,” then go to step 13.
If you connected an AV amplifier (receiver) using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 13.
If you connected an AV amplifier (receiver) using either a optical or coaxial digital cord, select “YES: DIGITAL OUTPUT.”
10Press X/x to select the type of
Dolby Digital signal you wish to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select
| AUDIO SETUP |
|
| |
|
| AUDIO DRC: |
| STANDARD |
|
| DOWNMIX: | DOLBY SURROUND | |
|
| DIGITAL OUT: |
| ON |
|
| DOLBY DIGITAL: |
| |
|
| MPEG: |
| |
|
| DTS: |
| DOLBY DIGITAL |
|
| 48kHz/96kHz PCM: | 48kHz/16bit | |
|
|
|
|
|
11Press ENTER.
“DTS” is selected.
AUDIO SETUP
AUDIO DRC: |
| STANDARD | |
DOWNMIX: | DOLBY SURROUND | ||
DIGITAL OUT: |
|
| ON |
DOLBY DIGITAL: |
| ||
MPEG: |
|
| PCM |
DTS: |
|
| OFF |
48kHz/96kHz PCM: |
| OFF | |
|
|
| ON |
12Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).
If your AV amplifier (receiver) has a DTS decoder, select “ON.” Otherwise, select “OFF.”
13Press ENTER.
Quick Setup is finished and connections are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 64).
Hookups
21