Yellow | Yellow |
White (L) | White (L) |
Red (R) | Red (R) |
Connect an S VIDEO cord (not supplied). You will enjoy high quality images. With this connection, select “LINE OUT/S VIDEO OUT” (default) by pressing the PROGRESSIVE button on the front panel.
CIf you are connecting to a monitor, projector, or AV amplifier (receiver) having component video input jacks (Y, PB/CB, PR/CR)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and press the PROGRESSIVE button on the front panel for more than three seconds to output progressive signals. For details, see “Selecting the video output jack and signal format (PROGRESSIVE button)” (page 17).
Note that when using the COMPONENT VIDEO OUT jacks will cause the picture to go blank. In this case, press the PROGRESSIVE button for more than three seconds. Repeat this step until you see the picture.
Green | Green |
Blue | Blue |
Red | Red |
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see page 61.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the player to this jack.
VCR
CD/DVD player |
| TV |
|
Connect directly
When you play a disc recorded in the NTSC colour system, the player outputs the video signal or the Setup Display etc. in the NTSC colour system and the picture may not appear on the PAL colour system televisions. In this case, open the tray and remove the disc.
16