Installation (cont.)

Start-Up Procedures for Pump Units (PIC 2P & PIC 3P only) (cont.)

NOTE: Do not let the end of the hose touch the bottom of the container. Shorten the hose if necessary. If you need a longer hose, remove the back access panel, unclamp existing hose, replace with longer hose and replace clamp.

3. Proceed with fifth step under Start Up for Standard Units.

How to Dispense a Cup of Cappuccino

On models with manual dispense switches (Refer to serial tag to verify model number of your machine)

1.Place cup under the selected drink dispense nozzle.

2.Push and hold the appropriate switch on the touchpad until cup is 2/3 full and then release switch.

On models with portion control (single portion or 3 portion per head): (optional on PIC 2, 3, & 4 only)

1.Place cup under the selected drink dispense nozzle.

2.Push appropriate switch on the touch pad, then release to dispense one preset serving. (see Portion Control Adjustment to set portion size)

NOTE: Portion may be cancelled by push and release of the switch during dispensing.

￿CAUTION: Cup must rest flat on tray with a 1/4” (6 mm) clearance between cup and spout. Contents can cause severe burns if handled improperly.

Adjustments

Portion Adjustment

If machine is a manual dispense, there are no portion control adjustments to be made. (Please refer to serial tag to reference model number.)

SETTING SINGLE PORTION CONTROL

1.Place a cup under the selected drink dispense nozzle.

2.Press and hold the dispense switch.

3.After a 10 second time delay, the machine is triggered into program mode and will begin dispensing.

4.Continue pressing the button until cup is approximately 2/3 full, then release the switch to prevent overfill. The elapsed portion dispense time is saved to memory and will remain until the dispense switch is reprogrammed.

5.Check the portion size by placing an empty cup under the desired dispense nozzle, then press and release the dispense switch. The machine will dispense the preprogrammed portion size.

6.If the portion size is incorrect, repeat above steps until the desired portion size is achieved. Each dispense switch needs to be set separately.

SETTING THREE PORTION SIZES PER HEAD (optional on PIC 2/3/4 only)

1.Place a cup under the selected drink dispense nozzle.

2.Press and hold the size button on the touch pad that you wish to program or set. (Hold button throughout entire procedure.)

3.Press and release the manual (top-off) button. After releasing the manual (top-off) button, the 10-second delay is activated.

4.Continue pressing the size button until cup is approximately 2/3 full, then release the switch to prevent overfill. The elapsed portion dispense time is saved to memory and will remain until the dispense switch is reprogrammed.

5.Check the portion size by placing an empty cup under the desired dispense nozzle, then press and release the dispense switch. The machine will dispense the preprogrammed portion size.

6.If the portion size is incorrect, repeat above steps until the desired portion size is achieved. Each portion size for each head needs to be set separately.

Crathco® Powdered Beverage Dispensers

Page 5

 

 

Page 4 Page 6
Page 5
Image 5
Grindmaster CC-302-20 service manual How to Dispense a Cup of Cappuccino, Adjustments, Portion Adjustment
Page 4 Page 6

CC-302-20 specifications

The Grindmaster CC-302-20 is a highly regarded coffee brewing machine designed for cafes and restaurants that require both quality and efficiency. This model stands out for its user-friendly features and advanced brewing technology, making it a popular choice among coffee enthusiasts and professionals alike.

One of the main features of the Grindmaster CC-302-20 is its programmable brewing cycles. This allows operators to customize brew times and temperatures according to their specific coffee offerings. The machine can brew up to 3 gallons of coffee per cycle, ensuring that businesses can meet high demand during peak hours without compromising on quality.

A significant characteristic of the CC-302-20 is its digital display, which provides real-time information on brewing status and alerts for maintenance needs. This feature ensures that users can monitor the brewing process at a glance, minimizing the chance of over-brewing or under-brewing coffee. The machine also includes an automatic shut-off function, which enhances energy efficiency and safety.

The Grindmaster CC-302-20 incorporates advanced brewing technology, notably its precision temperature control system. This system guarantees that water is heated to the optimal brewing temperature, which is crucial for maximizing the extraction of coffee flavors. This feature is particularly beneficial for cafes that pride themselves on serving high-quality, flavorful coffee.

Additionally, the CC-302-20 is designed with a durable, stainless steel construction, ensuring long-lasting performance in busy commercial environments. Its compact footprint makes it suitable for various countertop sizes, while the sleek design contributes to an appealing aesthetic in any coffee shop or restaurant.

Maintenance is another critical aspect of the Grindmaster CC-302-20. The machine is engineered for easy access to components, making it simple for staff to clean and service as needed. Regular maintenance routines can help extend the life of the equipment and maintain optimum brewing performance.

In conclusion, the Grindmaster CC-302-20 coffee brewer is an exceptional choice for establishments seeking a reliable, efficient, and high-quality brewing solution. Its programmable features, precision temperature control, and durable design make it an investment that meets the demands of busy coffee environments while consistently delivering delicious brews.
Top Page Image Contents