Playing Discs
Playing Discs 
Depending on the DVD or VIDEO CD, some | Playback side | |
facing down | ||
operations may be different or restricted. | 5 Press H. | |
Refer to the operating instructions supplied | ||
with your disc. | The disc tray closes. The player starts | |
| ||
| playback (continuous play). Adjust the | |
| volume on the TV or the amplifier | |
| (receiver). | |
| Depending on the disc, a menu may | |
| appear on the TV screen. For DVD | |
| VIDEOs, see page 25. For VIDEO CDs, | |
| see page 26. | |
| To turn off the player | |
| Press [/1. The player enters standby mode. | |
| z Hint | |
ENTER | You can have the player turn off automatically | |
whenever you leave it in stop mode for more than | ||
RETURN | ||
30 minutes. To turn this function on or off, set | ||
| “AUTO POWER OFF” in “CUSTOM SETUP” to | |
| “ON” or “OFF” (page 62). |
1 Turn on your TV.
2 Press [/1.
The player turns on.
3 Switch the input selector on your
TV so that the signal from the player appears on the TV screen.
◆When using an amplifier (receiver)
Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the player.
4 Press A on the player, and place a disc on the disc tray.
22
Note
Discs created on DVD recorders must be correctly finalized before they can be played. For more information about finalizing, refer to the operating instructions supplied with the DVD recorder.
Notes on playing DTS sound tracks on a
DVD VIDEO
•DTS audio signals are output only through the DIGITAL OUT (COAXIAL or OPTICAL) jack.
•When you play a DVD VIDEO with DTS sound tracks, set “DTS” to “ON” in “AUDIO SETUP” (page 64).
•If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “ON” in “AUDIO SETUP” (page 64). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.