Playing Discs in Various Modes
Controlling the TV or the AV Amplifier (Receiver) with the Supplied Remote Z
If you adjust the remote signal, you can control your TVs with the supplied remote. Default setting is to control Sony TVs with the gmark.
When you connect the player to a Sony amplifier, you can also set the input of the amplifier to this player with the supplied remote .
POWER
| 1 | 2 | 3 |
Number | 4 | 5 | 6 |
buttons | 7 | 8 | 9 |
|
| 0 |
|
Manufacturer | Code |
| number |
|
|
Sony (default) | 01 |
|
|
Gold Star | 03, 04 |
|
|
Philips | 06, 08 |
|
|
Miver | 09 |
|
|
Blaupunkt | 10, 21 |
|
|
Grundig | 11 |
|
|
Saba | 12, 13 |
|
|
Panasonic | 17, 49 |
|
|
Samsung | 23 |
|
|
Hitachi | 24 |
|
|
Sanyo | 25 |
|
|
Pioneer | 26 |
|
|
Mitsubishi | 27, 28, 50 |
|
|
Manufacturer Code number
Sharp 29
Aiwa 32
JVC 33
Toshiba 38
Siemens 39
Thomson 43
Loewe 45
Orion | 47, 48 |
|
|
Ferguson 52
NEC 66
TEAC 67
Akai 68
Nokia 69
Controlling TVs with the remote
Hold down POWER, and enter your TV’s manufacturer’s code in the table below using the number buttons. Then release POWER.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Notes
•If you enter a new code number, the code number previously entered will be erased.
•When you replace the batteries of the remote commander, the code number automatically resets to 01 (Sony). Reset the appropriate code number.
You can control your TV using the buttons below.
|
|
| TV/POWER | |
VOL |
|
|
| |
1 | 2 | 3 | CH | |
4 | 5 | 6 | ||
| ||||
7 | 8 | 9 | TV/VIDEO | |
| 0 |
| WIDE MODE |
By pressing | You can |
|
|
TV POWER | Turn on or off the TV |
|
|
TV/VIDEO | Select the input source for the TV |
|
|
WIDE MODE | Swiches the wide mode of the TV |
|
|
VOL | Adjust the volume of the TV |
|
|
CH | Change the channel of the TV |
|
|
Note
Depending on the TV, you may not be able to control your TV or to use some buttons above.