Getting Started
Unpacking
Check that you have the following items:
•Audio/Video connecting cord (1)
•S video cable (1)
•Remote commander (remote)
•Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote. Insert two R6 (size AA) batteries by matching the + and
–on the batteries. When using the remote, point it at the remote sensor gon the player.
zYou can control Sony TVs and AV amplifiers using the supplied remote
See page 32.
Notes
•Do not leave the remote in an extremely hot or humid place.
•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
•If you will not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hook up the CD/DVD player to a TV (with audio/video input jacks) and/or an amplifier. You cannot connect this player to a TV without a video input connector. Be sure to turn off
the power of each component before making the connections.
pTo listen to the sound through TV speakers
CD/DVD player
To AUDIO | To VIDEO | To an AC outlet |
OUT | OUT |
|
TV
To video
input
To audio
input 
: Signal flow
To an AC outlet
pTo listen to the sound through speakers connected to an amplifier
CD/DVD player
To | To |
| To an AC | |
VIDEO | ||||
AUDIO | outlet | |||
OUT |
| |||
OUT |
| |||
| TV | |||
|
| |||
|
|
| ||
|
| To video input | ||
Amplifier | To audio | To an AC outlet | |
(Receiver) | input | ||
|
: Signal flow | To an AC outlet |
6EN