Settings for Sound (INITIAL SETUP 2)

Select “

 

 

 

 

 

 

 

2 ” after pressing SET UP.

 

 

 

 

 

 

 

“INITIAL SETUP2” allows you to set the sound according to the playback conditions.

Default settings are underlined.

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

INITIAL

SETUP

2

 

 

 

 

 

 

 

 

 

 

 

 

TRACK

SELECTION:

OFF

 

 

 

SURROUND:

 

ON

 

 

 

DIGITAL

OUT:

 

PCM

 

 

 

 

 

 

 

 

 

 

 

AUDIO

DRC:

 

OFF

 

 

 

AUDIO

ATT:

 

OFF

 

 

 

 

 

ENTER

QUIT SETUP

 

 

 

 

 

 

 

 

 

 

 

pTRACK SELECTION

Gives the Dolby Digital (AC-3) format priority when you play a DVD on which multiple audio formats are recorded. If multiple audio channels are recorded in Dolby Digital (AC-3) format, the higher-numbered channel audio recorded in Dolby Digital (AC-3) format is played.

•OFF: No priority given.

•AUTO: Priority given.

Notes

•When you set this item to “ON”, the language may change depending on the “AUDIO” settings in “LANGUAGE SETUP.”

The “TRACK SELECTION“ setting has higher priority than that of “AUDIO” settings in “LANGUAGE SETUP” (page 35).

•Depending on the DVD, the audio with priority may be predetermined. In this case, you cannot give priority to the Dolby Digital (AC-3) format by selecting “AUTO.”

pSURROUND

Switches the mixing down methods when you play a DVD on which the sound in Dolby Digital (AC-3) format is recorded.

•ON: when the player is connected to an audio component that conforms to Dolby surround, Dolby Pro Logic surround, etc.

•OFF : when the player is connected to a normal audio component.

pDIGITAL OUT

Switches the methods of outputting audio signals from the DIGITAL OUT OPTICAL and COAXIAL connectors on the rear panel of the player.

•PCM: when the player is connected to an audio component without a built-in Dolby Digital (AC-3) decoder. The Dolby Digital track is output also in 2 channels and the surround component depends on the “SURROUND” setting.

•DOLBY DIGITAL/PCM: when the player is connected to audio component with a built-in Dolby Digital (AC-3) decoder.

Note

Select the setting correctly. Otherwise, no sound or strange sound will come out from the speakers, affecting your ears or causing the speakers to be damaged.

pAUDIO DRC (Dynamic Range Control)

Makes the sound clear with the volume turned down at night, etc. when you play a DVD. This affects the output from the DIGITAL OUT connectors only when “DIGITAL OUT” in ”INITIAL SETUP 2” is set to “PCM,” and the output from the LINE OUT (AUDIO 1,2).

•OFF: Normally select this position.

•ON: makes the sound clear even if you turned the volume down.

Note

When you play DVDs without the AUDIO DRC function, there may be no effect on the sound.

pAUDIO ATT (attenuation)

Selects the setting of the output from the LINE OUT (AUDIO 1, 2) connectors according to audio equipment to be connected.

•OFF: turns off the audio attenuation.

•ON: reduces the audio output level so that no sound distortion occurs.

Note

The setting does not affect the output from the DIGITAL OUT connectors.

37EN