Getting Started
Necessary Setup Before Using the Player
Some setups are necessary for the player depending on the TV or other components to be connected.
For details on using the setup display, see page 34. For details on each setup display item, see pages 35 to 37.
pIf the color system of the TV is PAL or DUAL
Since the color system of the unit is set to PAL, you can use the unit as it is.
pIf the color system of the TV is NTSC
To set the TV to NTSC, turn on the unit while pressing the button of the unit. To reset to PAL, turn off the unit and then turn on as described above.
pTo connect the player to a
In the setup display, set “TV TYPE” in “INITIAL SETUP 1” to “16:9.” This is default setting.
pTo connect the player to a normal TV
In the setup display, set “TV TYPE” in “INITIAL SETUP 1” to “4:3 LETTER BOX” or “4:3 PAN SCAN.” For details, see page 36.
pTo listen to the sound through speakers connected to an amplifier with a digital connector or to output the sound to a digital component such as a DAT or MD deck
When you play a DVD, set “DIGITAL OUT” in “INITIAL SETUP 2” to “PCM” in the setup display. This is default setting.
pTo connect the player to a digital component with a
In the setup display, set “DIGITAL OUT” in “INITIAL SETUP 2” to “DOLBY DIGITAL/PCM.”
Use the setup display to change the various settings for the picture and sound.
For details, see page 34.
Selecting the Language for On-screen Display
You can select the language for the setup display or the messages displayed on the screen. Default setting is “ENGLISH.”
SET UP
ENTER
?/>/.//
1Press SET UP and select “
” using ?//, and then press ENTER.
|
|
|
|
|
| 1 |
|
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
LANGUAGE | SETUP | |||||||||
OSD:ENGLISH
DVD MENU:ENGLISH
AUDIO:ORIGINAL
SUBTITLE: AUDIO FOLLOW
2Select “OSD” using >/., then press /or ENTER.
|
|
|
|
|
| 1 |
|
|
|
| 2 |
|
|
|
|
|
|
|
|
|
|
|
| ||
LANGUAGE | SETUP | |||||||||||
OSD:ENGLISH
DVD MENU:CH I NESE
AUDIO:ORIGINAL
SUBTITLE: AUDIO FOLLOW
3Select the language you want using >/., then press ENTER.
To cancel using the setup display on the way
Press SET UP.
Note
The languages you can select are the ones displayed in step 2. For details, see page 35.
9EN