DConnecting to an AV amplifier (receiver) with a digital input jack having a Dolby Digital, MPEG audio or DTS decoder and 6 speakers

This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function of your AV amplifier (receiver).

CD/DVD player

to DIGITAL OUT

 

 

 

 

 

 

(COAXIAL or OPTICAL)

 

 

or

 

 

Optical digital cord (not

Coaxial digital cord

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(not supplied)

 

 

 

 

 

supplied) Remove jack

 

 

 

 

 

 

 

cap before connecting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to coaxial digital input

 

 

 

to optical digital input

 

 

 

 

 

 

 

 

 

 

[Speakers]

 

 

[Speakers]

 

 

 

 

AV amplifier (receiver) having

 

 

 

 

 

 

 

 

 

a decoder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear (L)

 

Subwoofer

 

 

 

 

 

 

 

Front (L)

 

Centre

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear (R)

 

 

 

 

 

 

Front (R)

l: Signal flow

Note

After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “ON” in Quick Setup (page 23). If your AV amplifier (receiver) has an MPEG audio decoder function, set “MPEG” to “MPEG” (page 66). Otherwise, no sound or a loud noise will come from the speakers.

22