Sony DVP-NS400D manual 24

DConnecting to an AV amplifier (receiver) having a Dolby Surround (Pro Logic) decoder and 3 to 6 speakers

This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or DTS decoder, refer to page 21.

You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi- channel audio (Dolby Digital) discs.

Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used. If your amplifier (receiver) has L and R audio input jacks only, use D-1 . If your amplifier (receiver) has a digital input jack, use D-2 .

xRecommended surround sound effects using this connection with your amplifier (receiver).

• Dolby Surround (Pro Logic) (page 79)

zFor correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).

CD/DVD player

DIGITAL OUT	LINE OUT		S VIDEO	COMPONENT	5.1CH OUTPUT
			OUT	VIDEO OUT
PCM/DTS/				Y	FRONT REAR	CENTER
DOLBY DIGITAL	R-AUDIO 1-L	VIDEO 1			L
COAXIAL OPTICAL			1	PB
			2	PR
	R-AUDIO 2-L	VIDEO 2			R	WOOFER

	D-2			D-1
			Stereo audio cord
	DIGITAL OUT		(not supplied)	LINE OUT
				(white)
		Coaxial digital cord
	PCM/DTS/	(not supplied)		R-AUDIO -L	VIDEO 1
	DOLBY DIGITAL
	COAXIAL OPTICAL			(red)
		or	or
				R-AUDIO 2-L	VIDEO 2
	Optical digital cord
	(not supplied)
	Remove jack cap
	before connecting		(white)	(red)
	to coaxial or optical digital input			to audio input
	[Speakers]			[Speakers]
		Dolby Surround amplifier (receiver)
Rear	Rear			Front	Front
				(L)	(R)
(L)	(R)
	Subwoofer	Center		Rear*
				(mono)

l: Signal flow

∗When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a subwoofer.

24