Note

You can directly start Quick Setup only when you run it for the first time.

To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 65).

Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), the following items must be set as described below for the audio connection you selected in page 21 to 24 ( B through D ). Each of these are the default settings and do not need to be adjusted when you first connect the player. Refer to page 65 for using the Setup Display.

Audio Connection (page 21 to 24)

A

No additional settings are needed.

B-1

Item

You select

Page

DISTANCE

Set according to the connected

72

BALANCE

speakers

 

LEVEL

 

 

•If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 70).

•If “ENHANCED” or “SOFT” is selected in “CENTER SPEAKER EQ,” it makes the spoken track sound clear (page 70).

Hookups

B-2 C-2 D-2

Item

You select

Page

DOWNMIX

DOLBY SURROUND

70

 

 

 

DIGITAL OUT

ON

70

•Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect the amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 71).

C-1 D-1

Item

You select

Page

DOWNMIX

DOLBY SURROUND

70

•If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 70).

29