D

•ON (only if the amplifier (receiver) has a DTS decoder) (page 65)

15Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 65).

Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 20 to 22 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. Refer to page 60 for using the Setup Display.

Audio Connection (pages 19 to 22)

A

• No additional settings are needed.

B-1 C-1

•Set “DOWNMIX” to “DOLBY SURROUND” (page 64)

•If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 64)

B-2 C-2 D

•Set “DOWNMIX” to “DOLBY SURROUND” (page 64)

•Set “DIGITAL OUT” to “ON” (page 64)

Hookups

25