Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A through B, according to the input jack on your TV monitor, projector, or AV amplifier (receiver).

to SCART (EURO AV) Input

A

TV

B

INPUT

(yellow)

Audio/video cord

VIDEO

 

 

(supplied)

 

 

L

 

 

AUDIO

 

 

R

 

 

 

 

SCART (EURO AV)

TV, projector, or AV

cord (not supplied)

amplifier (receiver)

 

(yellow)

 

 

to LINE OUT (VIDEO)

 

to t LINE (RGB) - TV

DIGITAL OUT

LINE OUT

LINE

PCM/DTS/MPEG/

 

(RGB)

DOLBY DIGITAL

 

-TV

COAXIAL OPTICAL

R-AUDIO-L

VIDEO

 

 

CD/DVD Player

l: Signal flow

AIf you are connecting to a video input jack

Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will enjoy standard quality images.

Yellow (Video)

Yellow (Video)

White (L)

White (L)

Red (R)

Red (R)

Use the red and white plugs to connect to the audio input jacks (page 19). (Do this if you are connecting to a TV only.)

BIf you are connecting to a SCART (EURO AV) input jack

Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP” in the Setup Display (page 62), use a SCART (EURO AV) cord that conforms to each signal.

16