Sony DVP-NS330, DVP-NS333, DVP-NS430, DVP-NS433 TV Virtual Surround Settings (TVS), Sound, below, •TVS WIDE, ◆TVS WIDE, •TVS NIGHT, ◆TVS NIGHT, •TVS DYNAMIC, ◆TVS DYNAMIC, •TVS STANDARD, ◆TVS STANDARD

TV Virtual Surround Settings (TVS)

When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left,

R:right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV.

If the player is set up to output the signal from the DIGITAL OUT (COAXIAL or OPTICAL*) jack, the surround effect will only be heard when “DOLBY DIGITAL” is set to “D-PCM” and “MPEG” is set to “PCM” in “AUDIO SETUP” (page 65).

* For DVP-NS430/NS433 only.

SUR

1 Press SUR during playback.

The following display appears.

TVS DYNAMIC

2 Press SUR repeatedly to select one of the TVS sounds.Refer to the following explanations given for each item.•TVS DYNAMIC•TVS WIDE

•TVS NIGHT•TVS STANDARDTo cancel the setting

Select “OFF” in step 2.

◆TVS DYNAMIC

Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below).

This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

TV

◆TVS WIDE	Sound
	Adjustments
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below.
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
TV

◆TVS NIGHT

Large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you want to hear the dialog and enjoy the surround sound effects of “TVS WIDE” at low volume.

◆TVS STANDARD

Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. Use this setting when you want to use TVS with 2 separate speakers.

,continued 49