If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, damaging your ears or speakers.

◆DOLBY DIGITAL (DVD VIDEO/DVD-RW only)Selects the type of Dolby Digital signal.
D-PCMSelect this when the player is

 

connected to an audio

 

component without a built-in

 

Dolby Digital decoder. You can

 

select whether the signals

 

conform to Dolby Surround

 

(Pro Logic) or not by making

 

adjustments to the

 

“DOWNMIX” item in

 

“AUDIO SETUP” (page 64).

 

 

DOLBY

Select this when the player is

DIGITAL

connected to an audio

 

component with a built-in

 

Dolby Digital decoder.

 

 

◆DTS (DVD VIDEO only)Selects whether or not to output DTS signals.

OFF

Select this when the player is

 

connected to an audio

 

component without a built-in

 

DTS decoder.

 

 

ON

Select this when the player is

 

connected to an audio

 

component with a built-in DTS

 

decoder.

 

 

Note

When you use the DIGITAL OUT (COAXIAL or OPTICAL) jack to listen to MPEG audio signals and set “MPEG” to MPEG in “AUDIO SETUP”, no sound will come from your speakers if you select one of the TVS mode.

◆MPEG (DVD VIDEO/DVD-RW only)Selects the type of MPEG audio signal.
PCM

Select this when the player is

 

 

 

Settings

 

connected to an audio

 

 

 

 

 

component without a built-in

 

 

 

MPEG decoder. If you play

 

and

 

MPEG audio sound tracks, the

 

 

 

 

 

player outputs stereo signals

 

Adjustments

 

via the DIGITAL OUT

 

 

 

 

 

(OPTICAL or COAXIAL)

 

 

 

jack.

 

 

 

 

 

 

MPEG

Select this when the player is

 

 

 

connected to an audio

 

 

 

component with a built-in

 

 

 

MPEG decoder.

 

 

 

 

 

 

65