JVC RX-6000VBK manual Specifications, English, W per channel, min. RMS, driven into 8 Ω, Amplifier

English

Specifications

Amplifier

Output Power
	At Stereo operation:
	Front channels:	100 W per channel, min. RMS, driven into 8 Ω
		40 Hz to 20 kHz with no more than 0.8% total
		harmonic distortion.
	At Surround operation:
	Front channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
		more than 0.8% total harmonic distortion.
	Center channel:	100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
		0.8% total harmonic distortion.
	Rear channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
		more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz):	PHONO (MM):		2.7 mV/47 k Ω
	CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
			220 mV/47 k Ω
Audio Input (DIGITAL IN)* :	Coaxial: DIGITAL 1 (DVD):		0.5 V (p-p)/75 Ω
	Optical: DIGITAL 2 (CD):		–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:	TAPE/MD, VCR:	220 mV
Signal-to-Noise Ratio (’66 IHF/’78 IHF):	PHONO:	70 dB/78 dB (at REC OUT)
	CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
		87 dB/80 dB
Frequency Response (8 ohms):	PHONO:	20 Hz to 20 kHz (±1 dB)
	CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
		20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization:	±1 dB (20 Hz to 20 kHz)
Bass Boost:	+3 dB ±1
dB at 100 Hz
Tone Control:	Bass (100 Hz):	±10 dB ±2 dB
	Treble (10 kHz):	±10 dB ±2 dB
Video
Video Input Sensitivity/Impedance:
Composite video:	DBS, VCR, DVD:		1 V (p-p)/75 Ω
S-video:	DVD:	(Y: luminance):	1 V (p-p)/75 Ω
		(C: chrominance, burst):	0.286 V (p-p)/75 Ω
Video Output Level:
Composite video:	VCR, MONITOR OUT:		1 V (p-p)/75 Ω
S-video:	MONITOR OUT:	(Y: luminance):	1 V (p-p)/75 Ω
		(C: chrominance, burst):	0.286 V (p-p)/75 Ω
Synchronization:	Negative
Signal-to-Noise Ratio:	45 dB

32