JVC RX-6000VBK, RX-6008VBK English, 10 +10, Press TEST again to stop the test tone, Dsp Effect

Models: RX-6000VBK RX-6008VBK

1 39
Download 39 pages 30.79 Kb
Page 27
Image 27
Press TEST again to stop the test tone.

English

4. Adjust the speaker output levels.

• To adjust the center speaker level, press

CENTER –/+ (from –10 dB to +10 dB).

• To adjust the left rear speaker level, press

REAR•L –/+ (from –10 dB to +10 dB).

• To adjust the right rear speaker level, press

– CENTER +

5 Manual backgroundManual backgroundManual backgroundManual backgroundManual background 6

– REAR•L +

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

REAR•R –/+ (from –10 dB to +10 dB).

8

9

MENU

– REAR•R +

10 Manual backgroundManual backgroundManual backgroundManual backgroundManual background +10

ENTER

1.Press DSP MODE repeatedly until “THEATER” appears on the display.

The ÙPRO LOGIC and DSP indicators also light up on the display.

2.Adjust the speaker output levels.

DSP MODE

ADJUST

5.

Press TEST again to stop the test tone.

TEST

1

 

 

6.

Press EFFECT to select an effect

EFFECT

 

level you want.

4

Each time you press the button, the effect level changes as follows:

1)Press ADJUST repeatedly until one of the following indications appears on the display.

“CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

Once you have pressed ADJUST, MULTI CURSOR % / Þ can be also used for selecting the speaker.

MULTI CURSOR

Manual background DSP EFFECT 1 Manual backgroundDSP EFFECT 2 Manual backgroundDSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

2)Press MULTI CURSOR @/ # to adjust the selected speaker output level (from –10 dB to +10 dB).

3)Repeat 1) and 2) to adjust the other speaker output levels.

4.Adjust the effect level.

1)Press ADJUST repeatedly until “DSP EFFECT” appears on the display.

Once you have pressed ADJUST, MULTI CURSOR % / Þ also can be used for selecting “DSP EFFECT.”

The display changes to show the current setting.

ADJUST

MULTI CURSOR

2) Press MULTI CURSOR @/ #to select the effect level.

• As you press it, the effect level changes as follows:

Manual background DSP EFFECT 1Manual backgroundManual backgroundDSP EFFECT 2 Manual backgroundManual backgroundDSP EFFECT 3 Manual background

DSP EFFECT 5

DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

24

Page 27
Image 27
JVC RX-6000VBK English, 10 +10, Press TEST again to stop the test tone, DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT, Dsp Effect