JVC RX-6008VBK, RX-6000VBK Adjusting the 3D-PHONIC Modes, Adjusting the DAP Modes Headphones mode

Adjusting the 3D-PHONIC Modes

Once you have adjusted the 3D-PHONIC modes, the adjustment is memorized for each 3D-PHONIC mode.

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 12).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel:

DSP MODE

1. Press DSP MODE repeatedly until “3D ACTION” or “3D THEATER” appears on the display.

The 3D-PHONIC, DSP, and Ù PRO LOGIC indicators also light up on the display.

2. Adjust the effect level. ADJUST

1) Press ADJUST repeatedly until “DSP

EFFECT” appears on the display.

•Once you have pressed ADJUST, MULTI CURSOR %/ Þ can be also used for selecting “DSP EFFECT.”

•The display changes to show the current setting.

2) Press MULTI CURSOR @/ # to MULTI CURSOR

select the effect level.

• As you press it, the effect level changes as follows:

DSP EFFECT 1DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5 DSP EFFECT 4

As the number increases, the selected 3D-PHONIC mode becomes stronger.

Adjusting the DAP Modes and

Headphones mode

Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 12).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You cannot adjust the rear speaker output level when you have set “REAR SPK” to “NONE.” See page 12.

•You cannot make any adjustment for the headphones mode..

On the front panel:

1. Press DSP MODE repeatedly until	DSP MODE
the DAP mode — LIVE CLUB,
DANCE CLUB, HALL,
PAVILION, or HEAD PHONE —
appears on the display.

The DSP indicator also lights up on the display. (When the HEAD PHONE is selected, HEAD PHONE indicator lights up, instead of the DSP indicator .)

•When you have set “REAR SPK” to “NONE,” the 3D- PHONIC indicator also lights up. (Except for “HEAD PHONE.”)

2.Adjust the speaker output levels.

1) Press ADJUST repeatedly until one of	ADJUST
the following indications appears on
the display.

“REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

English

From the remote control:

1.Press SURROUND MODE repeatedly until “3D ACTION” or “3D THEATER” appears on the

display.

The 3D-PHONIC, DSP, and Ù PRO LOGIC indicators also light up on the display.

SURROUND

SURROUND

MODE

•Once you have pressed ADJUST, MULTI CURSOR %/ Þ can be also used for selecting the speaker.

2)Press MULTI CURSOR @/ # to

MULTI CURSOR

adjust the selected speaker output level (from –10 dB to +10 dB).

3) Repeat 1) and 2) to adjust the other speaker output level.

3. Adjust the effect level.

2. Press SOUND.			SOUND
The 10 keys are activated for sound adjustments.
3. Press EFFECT to select an effect			EFFECT
level you want.			4
• Each time you press the button, the effect
level changes as follows:
DSP EFFECT 1	DSP EFFECT 2		DSP EFFECT 3
DSP EFFECT 5		DSP EFFECT 4

As the number increases, the selected 3D-PHONIC mode

1) Press ADJUST repeatedly until “DSP

EFFECT” appears on the display.

• Once you have pressed ADJUST,

MULTI CURSOR % / Þ can be also

used for selecting “DSP EFFECT.”

• The display changes to show the

current setting.

2) Press MULTI CURSOR @/ # to

select the effect level.

• As you press it, the effect level

changes as follows:

ADJUST

MULTI CURSOR

becomes stronger.

DSP EFFECT 1DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5 DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

21