English

Setting the Speakers for the DSP Modes

To obtain the best possible surround sound of the DSP (Digital Signal Processor) modes (see page 18), you have to register the information about the speakers arrangement after all connections are completed.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Center Delay Time Setting

Register the delay time of the sound from the center speaker, comparing that of the sound from the front speakers.

If the distance from your listening point to the center speaker is equal to that to the front speakers, select 0 msec. As the distance to the center speaker becomes shorter, increase the delay time.

•1 msec increase (or decrease) in delay time corresponds to 30 cm decrease (or increase) in distance.

•When shipped from the factory, delay time is set to 0 msec.

Front, Center, and Rear Speaker Setting

Register the sizes of all the connected speakers.

On the front panel ONLY:

1. Press SETTING repeatedly until “CENTER DELAY” appears on the display.

SETTING

On the front panel ONLY:

1. Press SETTING repeatedly until

“FRONT SPK” (Front Speaker),

SETTING

•Once you have pressed SETTING, MULTI CURSOR %/ Þ can be also used for selecting “CENTER DELAY.”

•The display changes to show the current setting.

“CENTER SPK” (Center

Speaker), or “REAR SPK” (Rear

Speaker) appears on the display.

2. Press MULTI CURSOR @/ #to select the delay time of the center speaker output.

MULTI CURSOR

• Once you have pressed SETTING, MULTI

CURSOR %/ Þ can be also used for

selecting the speakers.

2. Press MULTI CURSOR @/ #to

select the appropriate item about

the speaker selected in the above

step.

MULTI CURSOR

• Pressing # increases the delay time from 0 msec (“C. DELAY: 0ms”) to 5 msec (“C. DELAY: 5ms”).

•Pressing @ decreases the delay time from 5 msec (“C. DELAY: 5ms”) to 0 msec (“C. DELAY: 0ms”).

Rear Delay Time Setting

LARGE SMALL NONE

LARGE: Select this when the speaker size is relatively large.

SMALL: Select this when the speaker size is relatively small.

NONE: Select this when you have not connected a speaker. (Not selectable for the front speakers)

3.Repeat steps 1 and 2 to select the appropriate items for the other speakers.

Notes:

• Keep the following comment in mind as reference when adjusting.

– If the size of the cone speaker unit built in your speaker is greater

than 12 cm, select “LARGE,” and if it is smaller than 12 cm,

select “SMALL.”

• If you have selected “NO” for the subwoofer setting, you can only

select “LARGE” for the front speaker setting.

Register the delay time of the sound from the rear speakers, comparing that of the sound from the front speakers.

If the distance from your listening point to the rear speakers is equal to that to the front speakers, select 0 msec. As the distance to the rear speakers becomes shorter, increase the delay time.

•1 msec increase (or decrease) in delay time corresponds to 30 cm decrease (or increase) in distance.

•Rear delay time for Dolby Digital and DTS Digital Surround is to be set to 5 msec.

•When shipped from the factory, delay time is set to 5 msec.

On the front panel ONLY:

1. Press SETTING repeatedly until

SETTING

 

“REAR DELAY” appears on the

 

display.

 

•Once you have pressed SETTING, MULTI CURSOR %/ Þ can be also used for selecting “REAR DELAY.”

•The display changes to show the current setting.

•

If you have selected “SMALL” for the front speaker setting, you

 

cannnot select “LARGE” for the center and rear speaker settings.

•

When you change your speakers, you need to register the

 

information about the speaker again.

2. Press MULTI CURSOR @/ #to select the delay time of the rear speaker output.

MULTI CURSOR

• Pressing # increases the delay time from 0 msec (“R. DELAY: 0ms”) to 15 msec (“R. DELAY: 15ms”).

•Pressing @ decreases the delay time from 15 msec (“R. DELAY: 15ms”) to 0 msec (“R. DELAY: 0ms”).

12

Page 14 Page 16
Page 15
Image 15
JVC RX-6000VBK manual Setting the Speakers for the DSP Modes, Center SPK Center, Select the appropriate item about, Step
Page 14 Page 16

RX-6000VBK, RX-6008VBK specifications

The JVC RX-6008VBK and RX-6000VBK are integral components of JVC's renowned line of receivers, designed to elevate home audio experiences with their impressive features and advanced technologies. These models cater to both casual listeners and audiophiles alike, offering a robust combination of performance and versatility.

One of the standout features of the RX-6008VBK and RX-6000VBK is their powerful amplification system. Both receivers deliver a significant output power, enabling them to drive speakers effectively and provide a rich, immersive sound experience. With 100 watts per channel, they can fill larger rooms with high-quality audio, bringing movies, music, and games to life.

These receivers are also equipped with multi-channel processing capabilities, allowing users to set up surround sound systems effortlessly. The RX-6008VBK and RX-6000VBK support various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that users can enjoy high-definition audio from their home theater systems.

Another notable characteristic is the incorporation of JVC's proprietary technologies. The receivers feature the Audyssey room correction technology, which calibrates the sound based on the acoustics of the room, ensuring optimal audio performance across different environments. This technology tailors the audio output to accommodate any room, delivering clear and balanced sound.

Connectivity is a significant aspect of the RX-6008VBK and RX-6000VBK. Both models provide an array of inputs, including HDMI, optical, and analog connections, making it easy to connect multiple devices such as gaming consoles, Blu-ray players, and streaming devices. The HDMI inputs support 4K Ultra HD passthrough, ensuring compatibility with the latest video formats, enabling users to enjoy stunning visual clarity.

Moreover, these receivers come with built-in Bluetooth capabilities, allowing users to stream audio directly from their smartphones or tablets. This wireless feature enhances convenience, offering an easy way to enjoy music without the hassle of cables.

In terms of design, the JVC RX-6008VBK and RX-6000VBK boast sleek and modern aesthetics, fitting seamlessly into any home decor. The user-friendly interface and remote control facilitate effortless navigation through various settings and playback options.

Ultimately, the JVC RX-6008VBK and RX-6000VBK are exceptional audio receivers, combining performance, advanced technologies, and user-friendly features. Whether for casual listening or an immersive home theater setup, these models stand out as reliable choices for enhancing any audio experience.
Top Page Image Contents