AIf you are connecting to a SCART (EURO AV) input jack
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP” in the Setup Display (page 77), use a SCART (EURO AV) cord that conforms to each signal.
BIf you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will enjoy standard quality images.
Yellow (Video) | Yellow (Video) |
White (L) | White (L) |
Red (R) | Red (R) |
Use the red and white plugs to connect to the audio input jacks (page 23).
CIf you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
If you are connecting to a VCR
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from your TV.
Notes
•Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen.
VCR
SACD/DVD player |
| TV |
|
Connect
directly
•If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB component
jacks, set 
to t(Audio/Video) on your TV. When you select 
(RGB), the TV cannot receive the signal from the VCR.
20