Notes

•If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

•Do not place the rear speakers farther away from your listening position than the front speakers.

•These settings do not affect the SACD Multi audio signals.

xBALANCE

You can vary the balance of the left and right speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

FRONT Adjust the balance between the

(0dB) front left and right speakers (– 6dB [L] to +6dB [R], 0.5dB increments).

REAR (0dB) Adjust the balance between the rear left and right speakers (– 6dB [L] to +6dB [R], 0.5dB increments).

xLEVEL

You can vary the level of each speaker as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

FRONT (0dB)

Adjust the level of the front

 

speakers (–6dB to 0dB, 0.5 dB

 

increments).

 

 

CENTER

Adjust the level of the centre

(0dB)

speaker (–12dB to 0dB, 0.5dB

 

increments).

 

 

REAR (0dB)

Adjust the level of the rear

 

speakers (–12dB to 0dB,

 

0.5dB increments).

 

 

SUBWOOFER

Adjust the level of the

(0dB)

subwoofer (–10dB to +10dB,

 

0.5dB increments).

 

 

To adjust the volume of all the

speakers at one time

Use the amplifier’s (receiver’s) volume control.

xTEST TONE

The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust the “BALANCE” and “LEVEL.”

OFF

The test tone is not emitted from

 

the speakers.

 

 

ON

The test tone is emitted from each

 

speaker in sequence while

 

adjusting balance or level.

 

When you select one of the

 

“SPEAKER SETUP” items, the

 

test tone is emitted from both left

 

and right speakers simultaneously.

 

 

Adjusting the speaker volume and level

1 Select “SPEAKER SETUP” in the Setup Display.

2 Select “TEST TONE” and set to “ON.”

You will hear the test tone from each speaker in sequence.

3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” using C/c and “LEVEL” using X/x.

The test tone is emitted from both left and right speakers simultaneously.

4 Select “TEST TONE” and set to “OFF” to turn off the test tone.

Notes

•When you adjust the speaker settings, the sound cuts off for a moment.

•The test tone signals are not output from the digital jack.

86