Notes
•The player can store the settings of up to 50 discs. When you store the setting of disc number 51, the first disc setting is cancelled.
•The Playback Memory function cannot be used for
•During playback, do not turn off the player by pressing POWER on the player. Doing so may cancel the settings. When you turn off the player, press xfirst to stop playback and then press [/1on the remote. After the power indicator lights up in red and the player enters standby mode, press POWER on the player.
xTRACK SELECTION (DVD VIDEO
only)
Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, MPEG audio, DTS, or Dolby Digital format) are recorded.
OFF | No priority given. |
|
|
AUTO | Priority given. |
|
|
Notes
•When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 76).
•If PCM, DTS, MPEG audio, and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS, Dolby Digital, and MPEG audio sound tracks in this order.
xCD DIRECT
Eliminates the use of unnecessary circuits when playing CDs.
This setting will be activated when you open/ close the disc tray.
This function affects the output of the following jacks:
—LINE OUT L/R (AUDIO) jacks
—LINE 1
—5.1CH OUTPUT jacks
OFF | Select this when playing CD discs, |
| including CD type DTS discs. |
|
|
ON | Eliminates the use of unnecessary |
| circuits needed to play CDs. |
|
|
Note
If you select “ON” when playing CD type DTS discs, the sound will become noisy.
80