Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 23 to 29 ( B through E ). Each of these is the default setting and does not need to be adjusted when you first connect the player. See page 74 for using the Setup Display.

Audio connection (pages 22 to 29)

A

• No additional settings are needed.

B-1 C-1 D-3 E

•Set “DOWNMIX” to “DOLBY SURROUND” (page 80).

B-2 C-2 D-2

•Set “DOWNMIX” to “DOLBY SURROUND” (page 80).

•Set “DIGITAL OUT” to “ON” (page 80).

D-1

•Set “DISTANCE” and “LEVEL” according to the connected speakers (page 83).

zHints

• For connections B-1C-1D-1

If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 80).

• For connections B-2C-2D-2D-3

E

Set “48 kHz/96 kHz PCM” to “96 kHZ/24 bit” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 81).

Hookups

35