Controlling Your TV or AV Amplifier (Receiver) With the Supplied Remote
By adjusting the remote signal, you can control your TV with the supplied remote. If you connect the player to an AV amplifier (receiver), you can control the volume with the supplied remote.
TV/DVD | [/1 | |
switch | 2 +/– | |
Number | ||
| ||
buttons | TV/VIDEO | |
| ||
ENTER | WIDE MODE | |
|
Notes
•Depending on the unit being connected, you may not be able to control your TV using some of the buttons below.
•If you enter a new code number, the code number previously entered will be erased.
•When you replace the remote’s batteries, the code number you have set may be reset to the default setting. Set the appropriate code number again.
Controlling TVs with the remote
1 Slide the TV/DVD switch to TV.
2 Hold down [/1, and enter the manufacturer’s code for your TV using the number buttons (see “Code numbers of controllable TVs” below).
3 Release [/1.
When the TV/DVD switch is set to TV, the remote performs the following:
[/1 | Turns the TV on or off |
2 +/– | Adjusts the volume of the TV |
|
|
Number buttons, | Selects the channel of the TV |
| |
|
|
WIDE MODE | Switches to or from the wide |
| mode of a Sony wide TV |
|
|
TV/VIDEO | Switches the TV’s input |
| source between the TV and |
| other input sources |
| The button works even if the |
| TV/DVD switch is set to |
| DVD |
|
|
*If you use number buttons to select the TV’s programme position, press
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Manufacturer | Code number |
Sony | 01 (default) |
|
|
Aiwa | 01 |
|
|
Grundig | 11 |
|
|
Hitachi | 23,24,72 |
|
|
Loewe | 06,45 |
|
|
Nokia | 15,16,69,73 |
|
|
Panasonic | 17,49 |
|
|
Philips | 06,07,08,23,45,72 |
|
|
Saba | 12,13,36,43,74,75 |
|
|
Samsung | 06,22,23,71,72 |
|
|
Sanyo | 25 |
|
|
Sharp | 29 |
|
|
Telefunken | 12,13,36,43,74,75 |
|
|
Thomson | 12,13,43,74,75 |
|
|
Toshiba | 38 |
|
|
LG | 06 |
|
|
JVC | 33 |
|
|
72