• SUBWOOFER
YES | Select this if you connect a |
| subwoofer to output the LFE |
| (low frequency effect) signals |
| from the subwoofer. |
|
|
NONE | Select this if you do not connect |
| a subwoofer. |
|
|
Notes
•If your speakers are too small to reproduce low bass frequencies, utilize a subwoofer for low frequency sound. When you set the speaker settings to “SMALL,” the bass redirection circuitry will be activated and the bass frequencies for the speakers are output from the subwoofer.
•Even if there are fewer than 6 speakers connected, the player distributes the audio signal components to the front speakers.
•When you set the front speaker setting to “SMALL,” you cannot set the centre and rear speaker settings to “LARGE,” and the subwoofer setting to “NONE.”
◆DISTANCE
Sets the distance from your listening position to the speakers.
Set the distance to your front speakers in “FRONT” first (A). Then adjust the values in “CENTER” (centre speaker B), “REAR” (rear speaker C), and “SUBWOOFER” (D) to reflect the actual distance to your centre speaker, rear speakers, and subwoofer.
B
D
A | A |
(0.3~9 m) | (0.3~9 m) |
C C
Be sure to change the value in the Setup Display each time you move the speakers. Start from the front speaker. The default adjustments are in parentheses.
FRONT | Set this between 0.3 and |
(3 m) | 9 m in 0.3 m increments. |
CENTER (3 m) | Set this within |
| “FRONT” setting in 0.3 m |
| increments. For example, if |
| “FRONT” is set to 6 m, |
| “CENTER” can be set |
| between 4.5 and 6 m. |
REAR (3 m) | Set this within |
| “FRONT” setting in 0.3 m |
| increments. For example, if |
| “FRONT” is set to 6 m, |
| “REAR” can be set |
| between 1.5 and 6 m. |
SUB WOOFER | Set this within |
(3 m) | “FRONT” setting in 0.3 m |
| increments. For example, if |
| “FRONT” is set to 6 m, |
| “SUB WOOFER” can be |
| set between 1.5 and 6 m. |
Notes
•If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.
•The minimum distance is 0.3 m.
◆LEVEL (FRONT)
Varies the level of the front speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
L (0 dB) | Set this between |
| dB in 0.5 dB increments. |
R (0 dB) | Set this between |
| dB in 0.5 dB increments. |
CENTER | Set this between |
(0 dB) | 0 dB in 0.5 dB increments. |
SUBWOOFER | Set this between |
(0 dB) | 0 dB in 0.5 dB increments. |
Adjustments and Settings
c continued | 83 |