JACKET | The jacket picture (still picture) |
PICTURE | appears, but only when the |
| jacket picture is already |
| recorded on the disc (DVD, |
| etc.). If the disc does not |
| contain a jacket picture, the |
| “GRAPHICS” picture appears. |
|
|
GRAPHICS | A preset picture stored in the |
| player appears. |
|
|
BLUE | The background colour is blue. |
|
|
BLACK | The background colour is black. |
|
|
◆BLACK LEVEL
Selects the black level (setup level) for the video (NTSC) signals output from the jacks other than COMPONENT VIDEO OUT/ HDMI OUT jacks.
OFF | Lowers the standard black |
| level. Use this when the picture |
| becomes too white. |
|
|
ON | Sets the black level of the |
| output signal to the standard |
| level. |
|
|
◆BLACK LEVEL (COMPONENT OUT)
Selects the black level (setup level) for the video (NTSC) signals output from the COMPONENT VIDEO OUT jacks. You cannot select this when the player outputs progressive signals (page 77).
OFF | Sets the black level of the |
| output signal to the standard |
| level. Normally select this |
| position. |
|
|
ON | Raises the standard black level. |
| Use this setting when the |
| picture appears too dark. |
|
|
◆COMPONENT OUT
Selects the type of signal output from the COMPONENT VIDEO OUT jacks. See page 89 for more information about the two different signal types.
INTERLACE | Select this when the |
| player is connected to a |
| standard (interlace |
| format) TV. |
PROGRESSIVE Select this when you have a TV that can accept progressive signals.
When the setting is changed, the confirmation display appears. If you do not select “Yes” or “No” within about 10 seconds, the setting is canceled and the display returns to the Setup Display.
To force the system to switch to interlace when “PROGRESSIVE” is selected Hold down x on the player and press PLAY on the player.
◆4:3 OUTPUT
This setting is effective only when you set “TV TYPE” in “SCREEN SETUP” to “16:9.” If you can change the aspect ratio on your progressive format (480p) compatible TV, change the setting on your TV, not the player.
Note that this setting is effective only for HDMI connection, or progressive signals output from the COMPONENT VIDEO OUT jacks.
FULL Select this when you can change the aspect ratio on your TV.
NORMAL Select this when you cannot change the aspect ratio on your TV. Shows a 16:9 aspect ratio signal with black bands on left and right sides of the image.
16:9 aspect ratio TV
◆LINE
Selects video signals output from the LINE
VIDEO Outputs video signals.
S VIDEO Outputs S video signals.
RGB | Outputs RGB signals. |
•If your TV does not accept S video or the RGB signals, no picture will appear on the TV screen, even if you select “S VIDEO” or “RGB.” Refer to the instructions supplied with your TV.
•If your TV has only one SCART (EURO AV) jack, do not select “S VIDEO.”
•When you select “RGB,” you cannot use the COMPONENT VIDEO OUT jacks.
Adjustments and Settings
c continued | 77 |