Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 26 to 28 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. See page 77 for using the Setup Display.

Audio Connection (pages 26 to 28)

A

• No additional settings are needed.

B-1 C-1

•Set “DOWNMIX” to “DOLBY SURROUND” (page 83).

B-2 C-2 D-2

•Set “DOWNMIX” to “DOLBY SURROUND” (page 83).

•Set “DIGITAL OUT” to “ON” (page 83).

D-1

•Set “DISTANCE,” “LEVEL (FRONT),” and “LEVEL (REAR)” according to the connected speakers (page 86).

zHints

• For connections B-2C-2D-2

Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 84).

• For connections B-1C-1D-1

If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 82).

•The speaker size you set in step 14 through 18 will also adjust the Super Audio CD speaker size of “SPEAKER SETUP.”

If you want to change the speaker size for Super Audio CDs, you can set in “SPEAKER SETUP” (page 85).

Hookups

33