Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume of the speakers to the same level.
This setting is effective when connecting the speaker with 5.1 CH OUTPUT jacks (page 28).
You can create two different Speaker Setup settings, one for Super Audio CDs and one for all other types of discs.
1 Follow steps 1 through 4 of “Using the Setup Display” (page 77) to select “SPEAKER SETUP” in the Setup display.
SPEAKER SETUP
DVD:
SUPER AUDIO CD:
2 Select “DVD” or “SUPER AUDIO CD” using X/x, then press ENTER.
Example: “DVD”
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
| LEVEL(FRONT): |
|
|
| |
| LEVEL(REAR): | OFF | |||
| TEST TONE: | ||||
|
| FRONT: |
| LARGE | |
|
| CENTER: |
| LARGE | |
|
| REAR: | LARGE(REAR) | ||
|
| SUBWOOFER: |
|
| YES |
|
|
|
|
|
|
3 Set the following items in the order that they are explained below.
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that only the “SIZE” setting does not return to the default setting.
◆SIZE
Selects the size of the speakers.
• FRONT
LARGE | Normally select this position. |
|
|
|
|
|
|
SMALL | Select this when the speaker |
|
|
| cannot reproduce adequate bass |
|
|
| frequencies. |
|
|
|
|
|
|
• CENTER |
|
|
|
|
|
| |
LARGE | Normally select this position. |
|
|
|
|
|
|
SMALL | Select this when the speaker |
|
|
| cannot reproduce adequate bass |
|
|
| frequencies. |
|
|
|
|
|
|
NONE | Select this if you do not connect |
|
|
| a center speaker. |
|
|
|
| ||
|
|
| Settings |
• REAR |
|
| |
|
|
| |
|
|
| |
LARGE | (REAR/SIDE): Normally select |
| and |
| this position. Select according |
| |
| to the rear speaker position*. |
| Adjustments |
|
|
| |
SMALL | (REAR/SIDE): Select this |
| |
|
| ||
| when the sound distorts or the |
|
|
| surround effects are difficult to |
|
|
| hear. Select according to the |
|
|
| rear speaker position*. |
|
|
|
|
|
|
NONE | Select this if you do not connect |
|
|
| rear speakers. |
|
|
|
|
|
|
* Rear speaker position
Correctly specify the location of the rear speakers to enjoy the surround effect.
•Set to “SIDE,” if the location of the rear speakers corresponds to section A below.
•Set to “REAR,” if the location of the rear speakers corresponds to section B below.
This setting affects only “VIRTUAL REAR SHIFT,” “VIRTUAL MULTI REAR,” and “VIRTUAL MULTI DIMENSION” mode (page 56). This setting does not affect the Super Audio CD Multi audio signals.
,continued 85