,While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.”
,The equipment connected to the HDMI OUT jack does not conform to the audio signal format, in this case set “AUDIO(HDMI)” in “AUDIO SETUP” to “PCM” (page 84).
No sound is output from the HDMI OUT jack
,The HDMI OUT jack is connected to a DVI device (DVI jacks do not accept audio signals).
,The HDMI OUT jack does not output Super Audio CD sound.
Sound distortion occurs.
,Set “AUDIO ATT” in “AUDIO SETUP” to “ON” (page 82).
The sound volume is low.
,The sound volume is low on some DVDs. The sound volume may improve if you set “AUDIO DRC” in “AUDIO SETUP” to “TV MODE” (page 82).
,Set “AUDIO ATT” in “AUDIO SETUP” to “OFF” (page 82).
The surround effect is difficult to hear when you are playing a Dolby Digital, or DTS sound track.
,Check the speaker connections and setting (page 28, 30, 83).
,The 5.1 channel sound is not recorded on the disc being played.
The sound comes from the center speaker only.
,Depending on the disc, the sound may come from the center speaker only.
,Set the surround mode setting to “OFF” (page 54).
OperationThe remote does not function.
,The batteries in the remote are weak.
,There are obstacles between the remote and the player.
,The distance between the remote and the player is too far.
,The remote is not pointed at the remote sensor on the player.
The disc does not play.
,The disc is turned over.
Insert the disc with the playback side facing down.
,The disc is skewed.
,The player cannot play certain discs (page 9).
,The region code on the DVD does not match the player.
,Moisture has condensed inside the player (page 5).
,The player cannot play a recorded disc that is not correctly finalized (page 9).
The MP3 audio track cannot be played (page 63).
,The DATA CD is not recorded in an MP3 format that conforms to ISO 9660 Level 1/ Level 2 or Joliet.
,The MP3 audio track does not have the extension “.MP3.”
,The data is not formatted in MP3 even though it has the extension “.MP3.”
,The data is not MPEG1 Audio Layer 3 data.
,The player cannot play audio tracks in MP3PRO format.
,“MODE (MP3, JPEG)” is set to “IMAGE (JPEG)” (page 67).
The JPEG image file cannot be played (page 63).
,The DATA CD is not recorded in a JPEG format that conforms to ISO 9660 Level 1/ Level 2, or Joliet.
,The file has an extension other than “.JPEG” or “.JPG.”
,The image is larger than 3072 (width) ⋅ 2048 (height) in normal mode, or more than 3,300,000 pixels in progressive JPEG. (Some progressive JPEG files cannot be displayed even if the file size is within this specified capacity.)
,The image does not fit the screen (the image is reduced).
,“MODE (MP3, JPEG)” is set to “AUDIO (MP3)” (page 67).
The MP3 audio tracks and JPEG image files start playing simultaneously.
,“MODE (MP3, JPEG)” is set to “AUTO.” (page 67).
Information Additional
,continued 89