Sony DVP-S335 Receiver (Amplifier) Hookups

Receiver (Amplifier) Hookups

This connection is for listening to the sound through speakers connected to a receiver lacking a built-in DTS, Dolby* Digital or MPEG decoder. Refer to the instructions supplied with the component to be connected as well.

zYou can enjoy surround sounds even if you connect front speakers only

You can use 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (VES:Virtual Enhanced Surround). For details, see page 36.

zIf you have a digital component with a built-in DTS, Dolby Digital or MPEG decoder

You can enjoy multi-channel surround sound by connecting the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied). For details on hookups and settings, see page 14.

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved.

CD/DVD player

Required cords

Audio connecting cord (not supplied) (1)

White (L)	White (L)
Red (R)	Red (R)

S video cord (not supplied) (1)

When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise.

If you have a digital component such as a receiver (amplifier) with a digital connector, DAT or MD, connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied).

Optical digital connecting cord (not supplied) (1)

Coaxial digital connecting cord (not supplied) (1)

Started Getting

			LINE-1 (RGB) - TV	LINE-2
AUDIO OUT		DIGITAL OUT
		PCM/DTS/MPEG/
		DOLBY DIGITAL
R	L	COAXIAL OPTICAL	VIDEO OUT	S VIDEO OUT

				To an AC outlet
To AUDIO	To DIGITAL	To S VIDEO
OUT (R, L)	OUT	OUT
	(OPTICAL)	To S VIDEO
	Take off the			TV
	cap.	input
			INPUT
To			S VIDEO
DIGITAL
OUT
(COAXIAL)
		To optical digital input	DIGITAL IN	Receiver
				(Amplifier) with
	or			a digital
			OPTICAL	connector, MD
				deck, DAT deck,
	or	To coaxial digital input	COAXIAL	etc.
			CD	Receiver
			L	(Amplifier)
			R
: Signal flow		To audio input

11