2+1 Channel Surround Hookups
This connection is for listening to the sound through the left and right speakers of the TV, or speakers connected to a receiver and the subwoofer. You can enjoy rich bass frequencies by connecting a subwoofer. Refer to the instructions supplied with the component to be connected.
Set “SUBWOOFER” in “SPEAKER SETUP” to “YES” in the setup display (page 57). Then set “FRONT SPEAKER SIZE” to “TV” when you use the TV’s speakers, or to “LARGE,” “MIDDLE” or “SMALL” when you use the speakers connected to the receiver.
zYou can enjoy surround sound with front speakers only
You can use 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (Virtual Enhanced Surround). For details, see page 36.
CD/DVD player
Required cords
Audio connecting cord (not supplied) (1)
White (L) | White (L) |
Red (R) | Red (R) |
S video cord (not supplied) (1)
When connecting the cords, be sure to match the
Monaural audio cord (not supplied) (1)
One for a subwoofer
Black | Black |
Started Getting
|
|
| ||
AUDIO OUT |
| DIGITAL OUT |
|
|
|
| PCM/DTS/MPEG |
|
|
|
| DOLBY DIGITAL |
|
|
R | L | COAXIAL OPTICAL | VIDEO OUT | S VIDEO OUT |
|
|
|
To an AC outlet
To AUDIO | To AUDIO | To S VIDEO |
OUT | OUT (R, L) | OUT |
(WOOFER) |
|
|
To S VIDEO input
TV
| To audio input | INPUT |
| VIDEO | |
Subwoofer |
| S VIDEO |
| L | |
(Active type) |
| AUDIO |
|
| R |
| or |
|
INPUT |
|
|
|
| Receiver (Amplifier) |
To audio input
CD
L
R
: Signal flow
Note
You cannot enjoy a picture with an S video signal if your TV does not conform to the S video signal. When your TV does not have an S VIDEO input, connect the component via the VIDEO INPUT connector using the video connecting cord (not supplied) instead of the S video cord. For details, see page 9.
Refer to the instructions supplied with your TV.
13