5.1 Channel Surround Hookups

Started Getting

With DVDs which contain DTS, Dolby Digital or MPEG AUDIO sound, you can enjoy the surround sound while producing the effect of being in a movie theater or a concert hall using a digital component with a built-in DTS, Dolby Digital or MPEG decoder (not supplied). The player outputs the surround sound signals from the DIGITAL OUT OPTICAL and COAXIAL connectors. Using a receiver (amplifier) having the OPTICAL or COAXIAL connector and 6 speakers, you can enjoy even greater real audio presence in the comfort of your own home.

Note

When a DVD has a sound track with 7.1 channels recorded in MPEG AUDIO format, the output audio signals are mixed down to 5.1 channels.

Required cords

Optical digital connecting cord* (not supplied) (1)

Coaxial digital connecting cord* (not supplied) (1)

S video cord (not supplied) (1)

*Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied). You do not need to connect both of these cords. See the figure on the next page.

Notes

•Do not connect the power cord to an AC outlet or press the POWER switch before completing all connections.

•Refer to the instructions supplied with the component to be connected.

•The cord connectors should be fully inserted into the jacks. Loose connection may cause hum and noise.

Setups for the player

Some setup adjustments are necessary for the player depending on the components to be connected.

Use the setup display to change the various settings. For details on using the setup display, see page 46.

•When you connect an audio component with a built- in Dolby Digital decoderA

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in the setup display. (page 56)

•When you connect an audio component with a built- in MPEG decoder B

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “MPEG” to “MPEG” in the setup display. (page 56)

•When you connect an audio component with a built- in DTS decoder C

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DTS” to “ON” in the setup display. (page 56)

 

AUDIO SETUP

 

 

 

 

AUDIO ATT:

OFF

 

 

 

AUDIO DRC:

STANDARD

 

 

 

DOWNMIX:

DOLBY SURROUND

 

 

 

DIGITAL OUT:

ON

 

 

 

DOLBY DIGITAL:

DOLBY DIGITAL

 

 

 

 

 

 

MPEG:

 

MPEG

 

 

 

 

 

 

 

DTS:

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To set, press

, then ENTER .

 

To quit, press

DISPLAY .

 

 

Notes

•When you do not connect an audio component with a built-in Dolby Digital decoder, do not set “DOLBYDIGIT AL” to “DOLBY DIGIT AL.”

•When you do not connect an audio component with a built-in MPEG decoder, do not set “MPEG” to “MPEG.”

•When you do not connect an audio component with a built-in DTS decoder, do not set “DTS” to “ON.”

14