TV Hookups

Started Getting

This connection is for listening to the sound through TV speakers (L:left, R:right). Refer to the instructions supplied with the component to be connected. You cannot connect this player to a TV without a SCART (EURO AV) connector or a video input connector.

zYou can enjoy surround sound with built-in TV speakers only

You can use 3D sound imaging to create virtual rear speakers from the sound of built-in TV speakers without using actual rear speakers (VES TV: Virtual Enhanced Surround TV). For details, see page 36.

CD/DVD player

 

 

 

LINE-1 (RGB) - TV

 

AUDIO OUT

 

DIGITAL OUT

 

 

 

 

PCM/DTS/MPEG/

 

 

 

 

DOLBY DIGITAL

 

 

R

L

COAXIAL OPTICAL

OUT

S VIDEO OUT

 

 

 

WOOFER

Required cords

SCART (EURO AV) connecting cord (not supplied) (2)

Be sure to make connections firmly to avoid hum and noise. Refer to the instructions supplied with the TV to be connected.

Notes

•When you set “LINE” to “S VIDEO” or “RGB” under

“CUSTOM SETUP” in the setup display, use a SCART (EURO AV) connecting cord that conforms to each signal.

•When you connect using the SCART (EURO AV) connecting cord, confirm that the TV corresponds to S VIDEO or RGB. Refer to the instructions supplied with the TV to be connected as well.

LINE-2

To an AC outlet

VCR

To TLINE-1

To iLINE-2

(RGB)-TV

 

To SCART (EURO AV) output

TV

To SCART (EURO AV) input

: Signal flow

8