Started Getting

TV Hookups

If you connect the player to a monitor or projector having component video input connectors that conform to the output signals from the COMPONENT VIDEO OUT (Y, CB/B-Y, CR/R-Y) connectors on the player

Connect the component via the COMPONENT VIDEO OUT connectors using three video connecting cords (not supplied) of the same kind. You will get a better picture.

Set “LINE” in “CUSTOM SETUP” to “VIDEO” or “S VIDEO” in the setup display, and set “COMPONENT OUT” to “ON.” (page 60)

In order to set COMPONENT OUT to ON, you must first connect the player to a projector or monitor using the LINE-1 connector so that the setup display appears on your screen.

COMPONENT VIDEO OUT

COMPONENT

Y

CB/

CR/

VIDEO IN

 

B-Y

R-Y

 

CR

CB

Y

Notes

•Refer to the instructions supplied with the component to be connected.

•Do not connect this player to a video deck. If you do, noise may appear in the picture.

VCR TV

CD/DVD

Connect

player

directly

 

 

•Depending on the TV or receiver (amplifier), sound distortion may occur because the audio output level is high. In this case, set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup display. For details, see page 64.

•If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB component connectors,

setto t (Audio/Video) on your TV. When you select (RGB), the TV cannot receive the signal from the VCR.

•If you want to use your VCR’s SmartLink function, connect the VCR to your TV’s SmartLink connector and connect the CD/ DVD player to the TV with another connector.

•When you connect the player to your TV via the SCART (EURO AV) connectors, the TV’s input source is set to the player automatically when you start playback or press any button except for ! on the player or @/1 on the remote. In this case, press TV/DVD on the remote to return the input to the TV.

•When you set “LINE” in “CUSTOM SETUP” to “RGB”, you cannot select the item “COMPONENT OUT” in “CUSTOM SETUP.”

•If you want to enjoy the picture’s RGB signals via the LINE-1 (RGB) connector, set “COMPONENT OUT” in the “CUSTOM SETUP” to “OFF,” then set “LINE” to “RGB” in the setup display. For details, see page 60.

•When you connect the player to a monitor or projector via only the COMPONENT VIDEO OUT connectors, do not select “OFF” in “COMPONENT OUT” under “CUSTOM SETUP.” If you select “OFF” in this case, the picture may not appear.

10