Sony DX250 17US, Started Getting, To connect the speaker cords, Avoiding short-circuitingthe speakers, Examples of poor conditions of the speaker cord

•Do not place the speakers in locations that are:

–Extremely hot or cold

–Dusty or dirty

–Very humid

–Subject to vibrations

–Subject to direct sunlight

•Use caution when placing the speakers and/or speaker stands (not supplied) that are attached with the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result.

•Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.

•Do not lean or hang on the speaker, as the speaker may fall down.

To connect the speaker cords

Connect the speaker cords after bending the bare wire at the end of the insulation. This prevents the speaker insulation from being inserted in the speaker terminal.

Started Getting

Note

• Do not catch the speaker cord insulation in the SPEAKER jack.

Avoiding short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord.

Examples of poor conditions of the speaker cord

Stripped speaker cord is	Stripped cords are touching each
touching another speaker	other due to excessive removal of
terminal.	insulation.

continued

17US