CTo connect to a TV with the COMPONENT VIDEO IN jacks

Connect a component video cord (not supplied). To use the COMPONENT VIDEO OUT jacks (Y, PB/ CB, PR/CR) instead of the video jacks, your TV monitor must be equipped with via COMPONENT VIDEO IN jacks (Y, PB/CB, PR/CR). If your TV accepts progressive format signals, you must use this connection and set the output channel of the system to progressive format (page 22).

Green

Blue

Red

When connecting to a standard 4:3 screen TVDepending on the disc, the image may not fit your TV screen.To change the aspect ratio, see page 72.Does your TV accept progressive signals?

Progressive is the method for displaying TV images which reduces flickering, and sharpens the image. To display using this method, you need to connect to a TV that accepts progressive signals.

FUNCTION

PROGRESSIVE

“P AUTO” or “P VIDEO” appears in the front panel display when the system outputs progressive signals.

1

2

Press FUNCTION repeatedly to select “DVD.”Press PROGRESSIVE.Each time you press PROGRESSIVE, the display changes as follows:
tP AUTO (PROGRESSIVE AUTO)

r

P VIDEO (PROGRESSIVE VIDEO)

r

INTERLACExP AUTO (PROGRESSIVE AUTO)Select this setting when:– your TV accepts progressive signals, and,– the TV is connected to the COMPONENT VIDEO OUT jacks.

Normally select this under the above condition. This automatically detects the software type, and selects the appropriate conversion method.

22US