Instructions
Cleaning the glass cooktop.
Metal Marks and Scratches
Instructions Safety
Be careful not to slide pots and pans across your cooktop. It will leave metal markings on the cooktop surface.
These marks are removable using the CERAMA BRYTE® Ceramic Cooktop Cleaner with the CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops.
If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop.
This should be removed immediately before heating again or the discoloration may be permanent.
WARNING: Carefully check the bottom of pans for roughness that would scratch the cooktop.
Cleaning Operating
Rubber-like Seal
To clean the
Glass surface—potential for permanent damage.
and
Our testing shows that if you are cooking high sugar
Damage from Sugary Spills and Melted Plastic
Troubleshooting Tips Care
mixtures such as jelly or fudge and have a spillover, it can cause permanent damage to the glass surface unless the spillover is immediately removed.
Turn off all surface units. Remove hot pans.
Wearing an oven mitt:
a.Use a
b.Remove the spill with paper towels.
Any remaining spillover should be left until the surface of the cooktop has cooled.
Don’t use the surface units again until all of the residue has been completely removed.
NOTE: If pitting or indentation in the glass surface has already occurred, the cooktop glass will have to be replaced. In this case, service will be necessary.
Consumer Support
To Order Parts
To order CERAMA BRYTE® Ceramic Cooktop Cleaner and the cooktop scraper, please call our
| National Parts Center | 800.626.2002 |
| ge.com |
|
| CERAMA BRYTE® Ceramic |
|
| Cooktop Cleaner | .# WX10X300 |
| CERAMA BRYTE® Ceramic |
|
| Cooktop Scraper | .# WX10X0302 |
| Kit | .# WB64X5027 |
| (Kit includes cream and cooktop scraper) | |
34 | CERAMA BRYTE® Cleaning Pads for | |
Ceramic Cooktops . . . . . . . . .# WX10X350 | ||
