GE JBP74 Using the surface units, Instructions Safety, Support, Consumer, How to Set

Models: JBP74

1 44
Download 44 pages 23.36 Kb
Page 8
Image 8
Instructions

Instructions

Using the surface units.

Throughout this manual, features and appearance may vary from your model.

Instructions Safety

Be sure you turn the control knob to OFF when you finish cooking.

How to Set

Push the knob in and turn in either direction to the setting you want.

At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.

A HOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cooled to approximately 150°F.

Indicator light will:

come on when the unit is turned on or hot to the touch.

stay on even after the unit is turned off.

glow until the unit is cooled to approximately 150°F.

Troubleshooting Tips Care and Cleaning Operating
Using the Bridge Burner

To use the bridge burner, turn the control knob to the BRIDGE BURNER settings.

For full bridge burner operation, turn on the rear burner.

To use only the front burner, turn the control knob to the FRONT BURNER settings.

Dual Surface Unit Control Knob

The dual surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.

To use the small surface unit, turn the

9" 6"

control knob to the SMALL BURNER settings.

To use the large surface unit, turn the control knob to the LARGE BURNER settings.

Triple Surface Unit Control Knob (on some models)

Support

The triple surface unit has 3 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.

To use the small surface unit, turn the control knob counterclockwise to the small burner settings.

To use the medium surface unit, turn the control knob clockwise (past the large burner) or counterclockwise (past the small burner) to the medium burner settings.

To use the large surface unit, turn the control knob clockwise to the large burner settings.

Consumer

Temperature Limiter

Every radiant surface unit has a

The temperature limiter may cycle the

temperature limiter.

units off for a time if:

The temperature limiter protects the

The pan boils dry.

glass cooktop from getting too hot.

The pan bottom is not flat.

 

8

The pan is off center.
There is no pan on the unit.
Page 8
Image 8
GE JBP74 Using the surface units, Instructions Safety, Support, Consumer, How to Set, Using the Bridge Burner