ge.com
Safety
Wire cover holder.
Oven Light Replacement
CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool completely.
To remove the cover:
Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.
Do not remove any screws to remove the cover.
Replace bulb with a
To replace the cover:
Place it into groove of the light receptacle. Pull wire forward to the center of the cover until it snaps into place.
Connect electrical power to the range.
Instructions Operating Instructions
Oven Heating Elements
Do not clean the broil element. Any soil | On some models, the bake element is not |
will burn off when the element is heated. | exposed and is under the oven floor. If spillovers, |
To clean the oven floor, gently lift the bake | residue or ash accumulate on the oven floor, |
element. Clean with warm, soapy water. | wipe up before |
|
31
Care and Cleaning Troubleshooting Tips Consumer Support
