Chapter 5: Troubleshooting
CHAPTER 5:
TROUBLESHOOTING
In the event that a problem is encountered, this section will assist you in determining the cause so you can return the unit to its usual
monitoring routine with minimal interruption.
Most problems with the Boat Remote are easy to identify and quickly corrected, and are found under the following general headings:
*Communications/Dial Out functions
*Temperature monitoring
*Bilge Pump monitoring
*Other monitoring functions
If you have tried the solutions outlined in this section and are not satisfied with the results, call Customer Service,
COMMUNICATIONS DIAL OUT
PROBLEM: The Boat Remote fails to detect an alarm condition.
CAUSE: The Boat Remote is operating in STANDBY MODE.
SOLUTION: Press the MODE button and change to either AWAY MODE or
CAUSE: The input is turned OFF or is programmed for STATUS- ONLY.
SOLUTION: Reprogram the input so that it is ACTIVE.
CAUSE: Alarm recognition time is too long. A fault condition does not remain in effect long enough to become a valid alarm.
SOLUTION: Reprogram the recognition time for the monitored condition to a shorter duration or trip the alarm for a longer period of time.
CAUSE: There are no phone numbers programmed.
SOLUTION: Program phone numbers.
CAUSE: The call selection list for the monitored input is empty.
73
