Chapter 3: Programming
53
Emergency High Water Level Input
The High Water Level Input will monitor the open or closed status of
a float switch. To program the Emergency High Water Level Input,
follow these steps.
Press SET.
Press HIGH WATER.
Using the number keys on the keypad enter the Alarm Recognition
Time, minutes and seconds. The range is from 1 second to 999
minutes 59 seconds. The default is 5 minutes.
Use the number keys to enter minutes.
Press ENTER.
Repeat for seconds.
The Input Mode will be displayed. The default is Active. Press the
MODE key on the keypad until the appropriate mode is shown on the
display.
Press the MODE key to toggle through the three input modes.